丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维（silk fibroin nanofibers,SFFs）,与硫酸钙、万古霉素（vancomycin,VCM）复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液（0.017 5~2.1 mg·mL^-1）的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。     

染发剂中4种p-苯二胺N位取代衍生物的高效液相色谱测定法

建立了高效液相色谱(HPLC)同时测定染发剂中N,N-双(2-羟乙基)-p-苯二胺硫酸盐(DHPD)、N,N-二甲基-p-苯二胺硫酸盐(DMPD)、N,N-二乙基-p-苯二胺硫酸盐(DEPD)、N-苯基-p-苯二胺盐酸盐(PPD)4种p-苯二胺N位衍生物的方法。采用Agilent Eclipse XDB-C18柱(150 mm×4.6 mm,5μm)为固定相,25 mmol/L磷酸缓冲液(pH 6.0,含0.1%的辛烷磺酸钠)和乙腈为流动相,梯度洗脱,流速1.0 mL/min,柱温25℃,进样量20μL,检测波长250 nm和280 nm。各组分的线性范围为0.1～400 mg/L,相关系数r为0.999 2～0.999 9,检出限为18～108 mg.kg-1,定量下限为42～320 mg.kg-1,RSD<10%,加标回收率为83%～115%。该方法具有简便、快速、准确等特点,基本满足实际样品的分析要求。     

Evaluation of the combinative application of SDS and sodium deoxycholate to the LC–MS‐based shotgun analysis of membrane proteomes

SDS and sodium deoxycholate (SDC) as two representative detergents have been widely used in LC–MS/MS‐based shotgun analysis of membrane proteomes. However, some inherent disadvantages limit their applications such as interference with MS analysis or their weak ability to disrupt membranes. To address this, the combinative application of SDS and SDC was developed and evaluated in our study, which comprehensively used the strong ability of SDS to lyse membranes and solubilize hydrophobic membrane proteins, and the high efficiencies of an optimized acetone precipitation method and SDC in sample clean‐up, protein recovery, and redissolution and digestion of precipitated proteins. The comparative study using a rat‐liver‐membrane‐enriched sample showed that, compared with other three commonly used methods including the filter‐aided sample preparation strategy, the combinative method not only increased the identified number of total proteins, membrane proteins, and integral membrane proteins by an average of 19.8, 23.9, and 24.8%, respectively, but also led to the identification of the highest number of matching peptides. All these results demonstrate that the method yielded better recovery and reliability in the identification of the proteins especially highly hydrophobic integral membrane proteins than the other three methods, and thereby has more potential in shotgun membrane proteomics.     

PEG-600-mediated,green and efficient,tandem syntheses of N-subtituted-2-styrylquinazolin-4- ones

Polyethylene glycol (PEG)-mediated, green and efficient, tandem syntheses of N-subtituted-2-styrylquinazolinones are being reported. Condensation of anthranilamide (1) with acetic anhydride in PEG-600, at 100°C for 1 hr gave 2-methyl-3H-quinazoline-4-one (2). Treatment of 2 with benzaldehydes in PEG-600, at 100°C for 2–3 hr, gave 2-styrylquinazolinone-4-ones (3) in excellent yields. Treatment of 3 (a–d) either with dimethyl sulfate (DMS), diethyl sulfate (DES), or with Ph-CH₂-Cl, individually in PEG-600, at 100°C for 1–2 hr without using any base, followed by simple processing resulted in N-substituted-2-styrylquinazolin-4-ones 5 (a–l). In an alternative approach, reaction of 4 (a–c) with benzaldehydes in PEG-600, at 100°C for 1–2 hr, without using any base, followed by simple processing resulted in 5 (a–l). 4 (a–c) were prepared by treatment of 2 with either DMS, DES, or with Ph-CH₂-Cl, individually, in the presence of PEG-600 as reaction medium, at 100°C for 1–2 hr without using any base. Both the sequence of reactions, 1 2 3 5 or 1 2 4 5 could be carried out in tandem in an efficient manner in PEG-600 without the isolation of any intermediates. The structures of all the new compounds synthesized in this work have been established on the basis of their spectroscopic data and analytical data.     

Thickness and morphology of polyelectrolyte coatings on silica surfaces before and after protein exposure studied by atomic force microscopy

Analyte–wall interaction is a significant problem in capillary electrophoresis (CE) as it may compromise separation efficiencies and migration time repeatability. In CE, self-assembled polyelectrolyte multilayer films of Polybrene (PB) and dextran sulfate (DS) or poly(vinylsulfonic acid) (PVS) have been used to coat the capillary inner wall and thereby prevent analyte adsorption. In this study, atomic force microscopy (AFM) was employed to investigate the layer thickness and surface morphology of monolayer (PB), bilayer, (PB-DS and PB-PVS), and trilayer (PB-DS-PB and PB-PVS-PB) coatings on glass surfaces. AFM nanoshaving experiments providing height distributions demonstrated that the coating procedures led to average layer thicknesses between 1 nm (PB) and 5 nm (PB-DS-PB), suggesting the individual polyelectrolytes adhere flat on the silica surface. Investigation of the surface morphology of the different coatings by AFM revealed that the PB coating does not completely cover the silica surface, whereas full coverage was observed for the trilayer coatings. The DS-containing coatings appeared on average 1 nm thicker than the corresponding PVS-containing coatings, which could be attributed to the molecular structure of the anionic polymers applied. Upon exposure to the basic protein cytochrome c, AFM measurements showed an increase of the layer thickness for bare (3.1 nm) and PB-DS-coated (4.6 nm) silica, indicating substantial protein adsorption. In contrast, a very small or no increase of the layer thickness was observed for the PB and PB-DS-PB coatings, demonstrating their effectiveness against protein adsorption. The AFM results are consistent with earlier obtained CE data obtained for proteins using the same polyelectrolyte coatings.     

Facile Synthesis and Unusual Methanesulfonylation Reaction of (2R,3R)‐1,4‐Dimethoxy‐1,1,4,4‐tetrasubstituted‐2,3‐butanediols

A facile method for the synthesis of (2R,3R)‐1,4‐dimethoxy‐1,1,4,4‐tetrasubstituted‐2,3‐butanediols involving oxidative cleavage of benzylidene acetal as a key step is described. These sterically hindered diols unusually formed cyclic sulfites as the major product under methanesulfonylation reaction conditions.     

Synthesis of Acylated Steroidal Olefins and Their Derivatives

Acylation of cholest-5-ene and cholest-5-ene 3-one with anhydrides in the presence of zinc chloride and characterization of products thus obtained on the basis of elemental analysis, spectral data, and chemical transformations are reported.     

Silica Chromate as a Novel Oxidizing Agent for the Oxidation of 1,4‐Dihydropyridines

Silica chromate easily converts 1,4‐dihydropyridines to their corresponding pyridines in the presence of NaHSO₄ · H₂O and wet SiO₂ in dichloromethane at room temperature in good to excellent yields.     

Synthesis and Luminescence of 14-Aryl- or Alkyl-14H-dibenzo[a,j]xanthenes Catalyzed by 2-1′-Methylimidazolium-3-yl-1-ethyl Sulfate

A facile and efficient synthesis of 14-aryl or alkyl-14H-dibenzo[a,j]xanthenes has been accomplished by treatment of β-naphthol with aryl or alkyl aldehydes catalyzed by 2-1′-methylimidazolium-3-yl-1-ethyl sulfate in ionic liquid [BMIM][BF₄] at 80°C. The luminescence of products was studied in detail.     

Pd-Cu–Mediated Synthesis of 2-Substituted Imidazo[1,2-α]pyridines in Water

The reaction of 2-amino-1-(2-propynyl)pyridinium bromide with various iodobenzenes, catalyzed by Pd-Cu, in the presence of sodium lauryl sulfate as the surfactant and cesium carbonate as the base, in water, leads to the formation of 2-substituted imidazo[1,2-α]pyridines.